Laptop Screen Is Not Turning On Though It Has Power

Hello there guys, I hope everything is going great with you and hope you all are good in health. No idea that Laptop Screen Is Not Turning On Though It Has Power?

No doubt having a laptop is very helpful, you can perform your task of the go, you can watch any movie anywhere you want, search anything you want to know about and do any task wherever you are.

With these benefits, there come some problems as well, it doesn’t mean problems are with the laptops only, but every machine, every technology has problems and issues.

Laptop’s biggest problem is the black screen. Oh god, this problem really gets every single laptop user worried. Booting issues are also there when a laptop does not boot properly always lead to worrying and even some people start panicking because of such problems.

As I mentioned that laptops are a source of entertainment for a lot of people nowadays, and even a source of work as well. People have their important data and documents saved in laptops.

Therefore, when your laptop turns on but is not showing or displaying any process or anything on the screen, this creates nervousness.

Though there are some useful tips you can use to recover your laptop from this problem, try them and see if you can really solve the problem on your own.

Useful Tips:

Tip # 1: Reseat the Cables and Battery of Your Laptop

  1. Switch off your laptop and close down the LCD screen of your laptop. Get rid of the AC power cable and all other cables connected to your laptop. Flip the laptop upside down and remove the battery pack.
  2. Take an eraser, and use it to clean all the metal contacts that are visible to your eye on the battery and on the battery bay.
  3. Clean and remove all the stains or any build-up that has found on the battery. After cleaning the battery, do not forget to blow and remove the eraser bits from the battery and the battery bay. Carefully blow all of it.
  4. After performing step 2 carefully, insert the battery back into its bat and then reconnect the AC power cable and other cables that had connected to the laptop. Make sure that you put and lock the battery well inside the battery bay and that the cables have all tightly connected.
  5. Switch on your laptop and inspect if you can see the display on your laptop’s screen.

If yes, then congratulations you have solved this problem of yours. And if this solution didn’t help you out, then go onto the Tip#2.

Tip # 2: Reseat Drives and Memory

  1. Switch off your laptop, remove the AC adapter off your laptop and close down the laptop’s screen. Flip over your laptop upside-down.
  2. Find and locate the cover for the memory section. There comes an icon picture of the memory stick or label on the memory cover slot on most of the laptops. Undo the screws that are holding the cover.
  3. Put inside your wrist into the sphere of the antistatic wrist strap and clip the other end to a metal surface.
  4. Undo and release the clips that secure the memory module in its slot. Take out the memory module, give it a blow and then put it back into the slot. Push it down until it snaps and fixes into its place. Assemble all the screws and replace the memory cover slot just as it was in the normally.
  5. Find and locate the hard drive cover, undo and remove the screws that are holding the cover. Dismount the hard drive and then put it inside again in its slot. Apply the same step for the CD drive or DVD drive of your laptop.
  6. After completing all these steps carefully, inspect everything is back on their places properly. Connect the AC adapter cable to the laptop and switch on your laptop.

Check if this Tip #2 helped you out on your problem or not. If not, then get onto the Tip #3.

Not a bad idea if you also like to: HP

Tip #3: Check Your Display With a Spare Monitor.

Laptop Screen Is Not Turning On Though It Has Power

  1. Switch off your laptop completely first, and then disconnect and remove the AC adapter from your laptop.
  2. Take the monitor cable from any spare external monitor and connect that cable to the VGA or DVI video out port on the rear of your laptop. Plugin the power cable of that external monitor and turn on the power.
  3. Switch on the laptop. As soon as the LED lights on the laptop are displayed, or you hear any hard drive in your laptop start working and spinning, press the “Fn” key combination. This will send the display of your laptop to that external monitor you have connected your laptop with. There is a key which has a monitor symbol on it. Press the “Fn” key and that monitor symbol key couple of times and see if any image shows up on the external monitor or not.

If the image and display appear on the monitor, the problem is with your LCD screen of the laptop. And if there had no image displayed on the external monitor as well, then either your laptop’s video card is encountering the problem or there is something wrong with the motherboard of your laptop.

And if there is some problem with the video card of your laptop or if you think your motherboard is faulty, it will be much better if you take your laptop to a professional computer technician or to a friend who has experienced in these types of things who knows how to repair laptops or replace some particular components of laptop or the computer.

I am recommending you not to perform such things on your own until and unless you don’t have any experience or you don’t know how to do such things, because the components inside the laptops are very small and sensitive.

One wrong move can literally damage your whole laptop. With Ifixit

Conclusion

I hope the tips I shared with you will solve this problem of yours. But still, if the problem remains, then take your laptop to a technician if you are not experienced about this.

Write a Comment